Tag Archives: 127 Film FAK

Yashica 44 LM (1958 – 1962)

Soon after I sent my Yashica 44 off to Mark Hama for repairs, I purchased this Yashica 44 LM. This camera was the last of Yashica’s 44 line of TLR’s that used 127 film.

Manufactured from 1958 to 1962, the Yashica 44 LM is nearly identical to the 44 and 44A. The main difference being the LM has a selenium light meter. Both the viewing and taking lenses are multi-coated, 4-element, 60mm f/3.5 Yashinon. Like the 44, the 44 LM has a Copal SV leaf shutter with speeds from 1 to 1/500th of a second and bulb. Mounted above the viewing lens is a semi-coupled selenium-cell light meter.

Aside from the light meter and the upgraded Yashinon lens with bayonet mount for lens attachments, the LM isn’t as good looking in my opinion as the 44 with the film advance crank and the gray color scheme. The selenium meter on this camera works and was accurate. I had no problems with exposure. I did have some light piping on my cut roll of 127 film. A roll of 120 film is both longer and thicker than original 127 film. When 120 is cut and rolled on to a 127 spool, there’s always a chance to expose the edges to light when loading and unloading the film from the camera. I fat-fingered the film while trying to load it. You can see the results of those shots below. And like the original 44, the LM is a quality-built camera. While the LM has a light meter, and that’s a useful feature, I still think the original 44 is my favorite 127 camera.

Clinton Days Car Show 2019
Camera: Yashica 44 LM (1958 – 1962)
Film: Rera Pan 100
Process: FPP-110 (1+31) 7 Min @ 68°
Scanner: Epson V600 Photo

Clinton Days Car Show 2019
Camera: Yashica 44 LM (1958 – 1962)
Film: Ultrafine Extreme 100
Process: FPP-110 (1+31) 7 Min @ 68°
Scanner: Epson V600 Photo

 

 


127 Film & The Kodak Baby Brownie

When 127 film was discontinued in 1995, photographers were left to create their own ways of cutting film to use in their favorite cameras. The easiest method is cutting 120 film down, and re-spooling it, with the backing paper, to a smaller 127 spool. There are a few different ways that this can be done. Some photographers have used a cigar cutter method. This method uses a single or double-bladed guillotine cigar cutter normally used for shouldering cigars, to cut the correct amount of film directly off a 120 spool. There’s also a 3-D printed cutter that comes up every once in awhile on eBay that uses the same cigar cutter design.

Last summer, Claudio at Camerhack in Italy introduced his new FCK127, a 3-D printed kit that contains everything needed to cut 120 film down to 127, in the daylight. To summarize the process, you prepare the 120 roll, cut the film in the winding module, and you’re done. Without going into the details of using the kit, you can watch Claudio’s video here. There are several pieces to the kit, and it may appear to be complicated, but it’s not.

When I purchased the Camerhack FCK127, I had two cameras that used 127 film. A Kodak Brownie Starflash (1957 – 1965) and a Kodak No. 0 Brownie (1914 – 1935). The FCK127 gave me an excuse to look at buying some new cameras. So, I went to eBay and started to look at cameras and purchased not one, but three: Kodak Baby Brownie (1934 – 1941), Yashica 44 (1958), and a Yashica 44 LM (1958 – 1962).

The Kodak Baby Brownie is an art deco styled bakelite camera that was made from 1934 to 1941 in the United States. It’s a simple camera that has a flip up viewfinder with an f/11 meniscus lens, and a rotary shutter that’s approximately 1/40th sec. The following images were created with the Kodak Baby Brownie. I had an issue seeing the frame numbers in the red window on the camera, so I had several shots that overlapped. I’ve decided to leave them for the most part. I had much better results with the two Yashica TLR cameras. In the coming weeks I’ll share those images and details about the two Yashica 44 cameras.

Camera: Kodak Baby Brownie (1934 – 1941)
Film: Fomapan 100
Process: FPP-110 (1+31) 7 Min @ 68°
Scanner: Epson V600 Photo